Riding the Rails – The Durango and Silverton Narrow Gauge Railroad

Yesterday was day four of our road trip. It was a great day. It was also a long day. But most of all it was an incredibly fun day.  We rode the Durango and Silverton Narrow Gauge Railway from Durango to Silverton. Had lunch and did some shopping in Silverton and then rode the train back to Durango. We boarded at 8:30 in the morning and didn't get back to Durango until almost 7 last night. The train runs 45 miles from Durango north to Silverton along the Animas River through wilderness that can only be accessed by train.

DSC_5037

It was a wonderful day for a lot of reasons. During the winter the train just goes part way to Silverton and then turns around. Today was the first trip of the season for the train to go all the way to Silverton. There was a festive air. It was an extra long train so part of the time we had two steam locomotives pulling us. There were all sorts of people along the route  who were waving and taking pictures as the train went by.

DSC_5038

DSC_5046

The route follows the Animas River. It was full from snow run off and there were lots of waterfalls coming into the river. When we were at over 9000 feet there were still jagged snow covered peaks towering above the canyon.The most impressive part of the ride was the High Line. The train creeps along a narrow rock ledge 240 feet above the river.

DSC_5050

DSC_5084

DSC_5072
And the history was fascinating. The Durango and Silverton railroad has been in continuous operation since 1882 when Durangoa and Silverton were booming mine towns.

But the best part of the whole experience was the people. There were four or five people in character who took turns coming into our car and  telling us about their lives on the frontier in the area.

DSC_5043

The conductors and concessions people were friendly and clearly excited. They hung around and answered our questions and pointed out their favorite sites along the route. They even pointed out a moose that was swimming across the river to get away from the train.

We stopped several times to take on water. Another time we stopped so three hikers could get off the train to start their back packing trip.

DSC_5065

One of the coolest things though was that the owner of the railroad was riding the train. He stopped in our car and talked with us. He told us he used to be a Florida real estate developer which allowed him to fulfill a dream and buy a railroad. He now owns a couple of other railroads and manges several others including the Tequila Train outside of Guadalajara, Mexico. He talked about how important he thinks it is to make history and our heritage alive and fun. His passion was contagious.

DSC_5052
These trains are a for profit operation and you couldn't help but notice how it improved the experience.  The guidebook cost $20 but it is a 188 page well written book with lots of color pictures. It covers everything from the history, to what we saw along the route, to how to run a railroad. Everyone we ran into from the owner down to the girl selling guidebooks made us feeling like we were a part of something very special.

If you ever get the chance take a ride on the Durangoa and Silverton Narrow Gauge railway. Do it!

 

 

 

 

 

Spring 2012 Road Trip – The Beginning

Duke and I left Wednesday on a six week U.S. road trip. From Reno we pretty much drove straight through to Cedar City Utah. We drove 527 miles. Nevada has some beautiful scenery and a lot of sage brush but we have explored much of it on previous trips.

Thursday our first stop was Zion National Park. We drove through the 1.1 mile Zion-Mount Carmel Tunnel. it was built in the 1920s. In this picture you can see one of the ventilation holes in the tunnel.

DSC_4989

Right on the other side of the tunnel is the Valley Overlook trail. It is a one mile round trip trail with an amazing view. It was a perfect day and a great hike.

DSC_4985

From Zion we drove to Pink Coral Sand Dunes State Park. If you look very closely you can see Duke on top of that sand dune. You should also be able to click on the picture to get a bigger view.

DSC_4997

Our next stop was the Glen Canyon Dam on the Colorado River. The dam created Lake Powell in northern Arizona. I was surprised that it was just completed in 1966.

DSC_5005

DSC_5003

Our mileage Thursday was 487 miles so after our stops at Zion and Pink Coral Sand Dunes we didn't get to Far View Lodge in Mesa Verde National Park in south west Colorado until sunset. We watched a beautiful sunset as we were driving into the park and then had a fabulous dinner with a bottle of wine at the lodge restaurant.

This morning (Friday) we took a tour of the park including climbing down into the Cliff Palace Cave Dwellings. Native Americans lived at Mesa Verde and farmed corn, beans and squash for 700 years but the cliff dwellings were only occupied for about the last 80 years before the Native Americans migrated south in search of water.

DSC_5012

DSC_5025

DSC_5026

Mesa Verde is covered with archaeological sites. We saw pit houses and a fascinating museum. I would like to visit again some day. After a picnic lunch we headed to Durango where we are tonight.

If you would like ot see all of our pictures from this trip they are available on Flickr here.

 

Project – New Aquarium, Divider, Stereo Cabinet, and Bookshelf

When we bought our house it had a half height divider between the hallway and the family room. This picture was taken on Thanksgiving 2008 just a couple of weeks after we moved into the house.I am standing in the living room looking towards the hallway and the family room. The divider can be seen just to the right of the book shelf.

  Thanksgiving 2008

Duke tore out the divider before he installed new hardwood flooring. Since the beginning of this year  he has been building a new divider. the divider includes our stereo equipment and a new 75 gallon aquarium which he also built. He finished the project a couple of weeks ago. It looks great. I am going to share some pictures with you. This picture is taken in the living room from about the same place as the picture above.

DSC_5082

Now looking in the other direction from the family room here is Duke with the finished product.

DSC_5021

The aquarium was built from two 4 foot by 8 foot sheets of Plexiglas. 

DSC_5020

The filter is built into the cabinet below the aquarium.

DSC_5032

 The cables for the stereo system are accessible from the doors on the back of the divider.

DSC_5024

DSC_5029

There are also speakers built into the bottom right and left.

DSC_5071

Duke also built the bookshelf  on the right above. You can see our turtle in the tank. We are a bit concerned that he may be getting jealous because of all the attention that the fish have been getting lately!

 Duke's next project will be to build desks in our office. Watch this space for updates. We are leaving on a six week cross country road trip  next week so you will soon be seeing travel pictures as I blog our trip.

 

The Beginnings of a Computer Career 45 Years Ago

I attended college and had a career in the computer industry during a fascinating time. When I started college the computer industry was young. I don't think Iowa State had more than a hand full of computers and undergraduates only saw the computer from behind glass. During the 40 plus years since I started college computers have become ubiquitous

I've decided to start writing a series of blog posts about some of my experiences. I hope to write about things that might be interesting to my children, grandchildren and great grandchildren.  I would have liked my grandmothers to write for their descendants. They could have written about driving a Model T, teaching in a one room school house, growing up on a homestead in North Dakota or living in the Canadian Rockies in the 1930s.

I remember being intrigued by computers during my last couple of years in High School. I built an electronic decimal to binary converter for a science fair, I think during my senior year. It was a project from a book. I knew nothing about soldering and not much about electricity. I built it but it didn't work. As I recall my Dad took it to one of his friends who got the project working for me. It had a few resisters, some wires, some lights and some push buttons. You pushed a button next to one of the numbers 1-9 and the right combination of four lights would come on to represent the binary equivalent of the number.

This is a picture of me in January 1969. I was 17. January is the beginning of the school year in Australia.

001 (2)

I attended school in Australia from 1964 until 1969. I went to high school at Clayfield College a Presbyterian and Methodist Girls school in Brisbane. The space flights leading to the first landing on the  moon were during this period. I was fascinated by space exploration. The practical use of computers and science in the space program fueled my interest in computers. Not long before we left Australia my Mom brought a television to school so we could watch the first moon landing on  20 July 1969.

From Australia we moved to St Charles Illinois and I started my senior year of High School year there in September 1969. It was hard being a new kid and having no friends. I was really glad to leave St Charles and move to London, England. I attended an American military dependents high school. I'm not sure but I think the science fair and the binary converter project may have been while I was a student at London Central High School. 

I got contact lenses soon after we moved ot London. This is my HIgh School graduation picture.

001

I knew I was going to go to college in the U.S. but I had no idea where to go. I took the SAT test in Brisbane before we left Australia. There was one other guy taking the test at the same time. I remember I had to have a social security number to sign up for the test so that is when I applied for and received my social security number. 

While we were living in Illinois one weekend my Dad drove me out to Ames, Iowa to visit Iowa State where he and my mother had gone to college. It is a beautiful campus. We met with the admissions director because I had a pretty strange high school transcript. He said I was admitted. As part of the admissions process I had to declare a major. I remember pouring over the Iowa State catalog which was a thick paperback book listing all the majors and classes. Since I enjoyed math I thought "What the heck, Computer science looks interesting." and I checked that box on the application. I figured I could always change it later.

At Iowa State in the Fall of 1970 my first computer science class was Fortran. We wrote programs on key punch pads so the key punch operators could punch the cards for us. Each line on the programming pad became a card to read into the computer.  If you procrastinated on your programming assignments you would have to use one of the key punch machines in the  basement of the computer science building to punch the cars for your assignment yourself.

This picture of one the keypunch machines in the basement of the computer science building is from my college yearbook.

  DSC_4946

Once we had our program on cards we would hand in our deck of cards to the clerks behind the desk in the basement where the computer was and the program would be run through the computer in the room behind the glass. Just finding all your syntax errors could take several cycles of handing in cards and coming back a few hours later to get the results of your run.

Although there were very few woman  in my classes my first computer science teacher for the Fortran class was a woman. I think June Smith was here name. We learned early on that if a line of code was longer than the 80 characters that would fit on one card we could create a continuation card by putting an x in the first column of the next card.  I remember her telling us about the student who thought you made continuation card by stapling the two cards together. You can imagine the serious damage that did to the card reader machine!

The first electronic pocket calculator the HP-35 was introduced by Hewlett Packard in 1972. It cost $395. I don't think I ever owned a calculator while I was in college. We did math for classes like Physics by hand or we used a slide rule. This picture of the HP-35 is from the book Core Memory – A Visual Survey of Vintage Computers.

DSC_4947

 Student protests against the war in Viet Nam and the killing of students at Kent Sate by the national guard occurred during my Freshman year at Iowa State. I was politically very conservative and Iowa State was a fairly conservative school. Although I had misgivings about the war I supported the U.S. policy in Viet Nam so I took no part in the protests at Iowa State.

If you have memories of this era please add them in the comments.

Random Stuff – Knitting and Duke’s BDay

It is so much fun to have a baby to knit for. In the past few month I knit a couple of things for my new granddaughter Briana.

Most recently I finished this sweater.

Photo Feb 21, 5 55 06 PM

Photo Feb 21, 5 56 05 PM

Before the sweater I knit a cape for her.

060

 

078

Yesterday was Duke's birthday. I made the traditional favorite meal – meat loaf, peas, and baked potatoes. I also baked a yummy cake – spice cake with gooey coconut, pecan frosting.

DSC_4944

And for his birthday present I gave him these.

DSC_4943